Skip to content
BiasNex logoBiasNex
Binance 24h ticker
Learn ICT· 7 min read·

Position Size for Crypto Futures With Leverage: The Formula and 3 Worked Examples

Position size = balance × risk % ÷ stop distance %. Leverage only sets margin and liquidation. Three worked examples plus a real BTCUSDT chart, as of 6 Nov 2026.

Cover image: Position Size for Crypto Futures With Leverage: The Formula and 3 Worked Examples

Get the daily bias and fresh setups in Telegram, free.

Trade setups on Telegram (opens Telegram in a new tab)
In this article

To size a crypto futures position, divide the amount you are willing to lose by the distance to your stop, as a percentage of the entry price. Position size = balance × risk % ÷ stop distance %. Leverage is not in that formula. It only sets how much margin the exchange locks for that size and how close your liquidation price sits. This guide shows how a position size calculator for crypto with leverage works, with three worked examples checked against the BiasNex calculator formulas and one real BTCUSDT chart.

Position size calculator for crypto with leverage: the formula

Start from the loss you accept, not from the trade you want. The calculator works in five steps, taken from the position size calculator itself:

  1. Risk amount = balance × risk %
  2. Stop distance % = |entry − stop| ÷ entry
  3. Position size (USDT) = risk amount ÷ stop distance %
  4. Quantity (coins) = position size ÷ entry
  5. Margin required = position size ÷ leverage
Formula: position size equals balance times risk percent divided by stop distance percent, with the example 10,000 times 1% divided by 2% equals 5,000 USDT
Formula as used by the BiasNex position size calculator

Steps 1 to 4 contain no leverage. Leverage appears only in step 5. Bybit's help center states the same relation for isolated margin: initial margin equals position value divided by leverage (page updated 22 Oct 2026, read 6 Nov 2026). If you want the longer argument for why leverage is a margin setting and not a risk setting, read what 10x leverage means.

Three worked examples

All prices and balances below are made up, and the numbers are the output of the calculator's formulas. The fee is an assumed 0.05% per side, charged on the entry value on both legs, as the calculator does. It is not a quote for any exchange: check your own fee tier.

Example 1: BTC long, 10x. Balance 10,000 USDT, risk 1%, entry 80,000, stop 78,400.

  • Risk amount: 10,000 × 1% = 100 USDT.
  • Stop distance: 1,600 ÷ 80,000 = 2%.
  • Position size: 100 ÷ 2% = 5,000 USDT, or 0.0625 BTC.
  • Margin at 10x: 5,000 ÷ 10 = 500 USDT, which is 5% of the balance.
  • Fees: 2 × 5,000 × 0.05% = 5 USDT, so the planned loss at the stop is 105 USDT.
  • With a target at 83,200 the reward is 1:2, a gross profit of 200 USDT and 195 after fees.

Example 2: ETH short, 5x. Balance 5,000 USDT, risk 2%, entry 3,000, stop 3,090 (above entry, because it is a short).

  • Risk amount: 5,000 × 2% = 100 USDT.
  • Stop distance: 90 ÷ 3,000 = 3%.
  • Position size: 100 ÷ 3% = 3,333.33 USDT, or 1.1111 ETH.
  • Margin at 5x: 666.67 USDT, which is 13.3% of the balance.
  • Fees: 3.33 USDT, so the loss at the stop is 103.33 USDT.

Example 3: BTC long, 25x, a stop that never gets used. Balance 2,000 USDT, risk 1%, entry 80,000, stop 76,000.

  • Risk amount: 20 USDT.
  • Stop distance: 4,000 ÷ 80,000 = 5%.
  • Position size: 20 ÷ 5% = 400 USDT, or 0.005 BTC.
  • Margin at 25x: 16 USDT, only 0.8% of the balance.
Table of the three examples: position 5,000, 3,333.33 and 400 USDT, margin 500, 666.67 and 16 USDT
Illustration · made-up prices · USDT

Look at the first two rows. Different balances, risk percentages, stop distances and leverage settings, yet the loss at the stop is 100 USDT in both. That is what sizing from the stop does.

When the leverage is too high for the stop

Example 3 hides a problem. The simple isolated liquidation estimate is entry × (1 − 1 ÷ leverage) for a long. At 25x that is 80,000 × (1 − 0.04) = 76,800. Your stop is at 76,000, below it. Price reaches 76,800 first, so the exchange closes the position before your stop can trigger.

Bars: the stop is 5% from entry but the 25x liquidation level is 4% from entry, so liquidation comes first
Illustration · liquidation ≈ 1 ÷ leverage

The estimate ignores maintenance margin, funding and exchange tiers, so the real liquidation price is slightly closer to entry still. Bybit defines maintenance margin as the minimum margin needed to keep a position open, and a position is liquidated when its margin falls to or below it. The fix is to lower the leverage until the liquidation level sits well beyond the stop. At 10x on the same trade, liquidation would be at 72,000, which is 10% from entry, twice as far as the 5% stop. The liquidation price formula post has the exact Binance and Bybit maths, and the liquidation price calculator gives a first estimate for your own entry.

Margin mode changes who bears the loss if it goes wrong: see isolated vs cross margin.

How it looks on a real chart

Here is the sizing from example 1 applied to real BTCUSDT hourly candles from Binance spot, fetched on 6 Nov 2026. Take a hypothetical long at the open of the 5 Nov 2026 00:00 UTC candle, 80,504.01. The stop is 79,900, just below the 79,952 low of the 4 Nov 20:00 UTC candle, a level where the idea would be wrong. That is 604.01 points, or 0.75% from entry.

With a 10,000 USDT balance and a 1% risk, the formula gives 100 ÷ 0.75% = 13,328.26 USDT, or about 0.1656 BTC. At 10x the margin is 1,332.83 USDT. At an assumed 0.05% per side the fees are 13.33 USDT, so the planned loss is 113.33 USDT.

Hourly BTCUSDT candles from 4 to 5 Nov 2026: a hypothetical long from 80,504 with a stop at 79,900 is stopped out by the 5 Nov 12:00 UTC candle, which has a low of 79,520
BTCUSDT · 1h · 4–5 Nov 2026 · Binance spot candles (last price) · hypothetical long, entry at the 5 Nov 00:00 UTC open, picked in hindsight, not a signal

Step 1 is the entry. Step 2 is the 12:00 UTC candle on 5 Nov, whose low of 79,520.32 went through the stop. The trade lost its planned 100 USDT plus fees. Price then kept falling: the lowest low in the window, up to the 18:00 UTC candle, was 75,568. The simple 10x liquidation level for this entry is 72,453.61 and it was never reached in this window, but a trader without a stop would have watched a much larger loss build on the screen.

We picked this trade after seeing the day, so it says nothing about how often such a setup works. These are last-price candles; exchanges trigger stops and liquidations on their own price rules, and slippage can make a fill worse than the stop. The point is the size: a 0.75% stop needed a 13,328 USDT position to risk 100 USDT, and a tighter stop would have needed an even larger one. Tight stops also make fees a larger share of the planned loss, which the risk:reward guide covers.

A routine before every trade

  1. Mark where the idea is wrong. That is the stop.
  2. Decide the risk as a share of your balance.
  3. Divide to get the position size, then check it against the exchange's minimum and maximum order size for the contract.
  4. Pick a leverage whose liquidation level is well beyond the stop. Use the lowest setting that gives you the margin you want to lock.
  5. Add fees to the planned loss.

More risk lessons are in the Learn ICT hub.

Common mistakes

  • Sizing from leverage. Choosing "10x on the whole account" tells you the margin, not the risk. The loss at the stop is size times stop distance.
  • Moving the stop after sizing. If you widen the stop, the size has to shrink. If you keep the size, you risk more than planned.
  • A stop beyond liquidation. As in example 3, the exchange closes you first.
  • Forgetting fees on tight stops. On a 0.75% stop, round-trip fees at 0.05% per side are about 13% of the planned risk.
  • Using the balance you do not have. Size from the account balance you are actually willing to put at risk, not the margin the exchange will allow.

FAQ

How do I calculate position size with leverage? Ignore the leverage at first. Position size = balance × risk % ÷ stop distance %. Then divide the position size by the leverage to get the margin the exchange will lock. Leverage changes the margin and the liquidation price, not the loss at your stop.

Does higher leverage mean a bigger position? Not by itself. Leverage lets you open a bigger position with the same margin, but the position size you should open is set by your risk and your stop. Opening the maximum size the leverage allows is a choice, not a requirement.

What leverage should I use? There is no single number. Pick the stop and size first, then choose a leverage where the liquidation level is clearly beyond the stop. For the same size, a lower leverage locks more margin and leaves more room.

Does the calculator include fees? Yes. The BiasNex calculator charges the fee on the entry value for both entry and exit, and adds it to the potential loss. Enter your own exchange fee.

Tags

Read the chart behind the story

News and analysis for education. Not financial advice. Market context on this page is generated from live Binance data by fixed rules. How we analyse markets